Some progress
Well not much happened for a week or more but I have now put all the scarfs on the planks I cut. I may have mentioned before that i was not going to make scarfs in the usual way but do lap-scarfs. To achieve this I have made a jig for my router. The jig is simple. Two lengths of coated 4mm ply screwed to the table set the height and act as guides. Two pieces of 12mm ply at 90deg on top make the platform and the left hand piece serves as a guide for the router fence.
posted by Heike @ 1:18 AM
0 Comments:
Post a Comment
<< Home